Step-by-Step 
Home Step-by-Step Order Contact Us

 

ONLY 1 HAND IS NEEDED
to follow these easy STEP-BY-STEP directions to
put Sling Comfort onto your sling.

#1 pp1.gif (152620 bytes) #2 pp2.gif (77267 bytes) #3 pp3.gif (87613 bytes) #4 pp4.gif (88856 bytes)
#5 pp5.gif (98356 bytes) #6 pp7.gif (86716 bytes) #7 pp8.gif (70804 bytes) #8 pp9.gif (109099 bytes)

INSTRUCTIONS:  

  1. Lay the strap of your sling out straight on a flat surface.

  2. Lay a ruler on half of the sling strap from the center to the sling strap end.

  3. Fold the remaining end of the sling strap over the ruler.

  4. Hold the ruler firmly.

  5. Push the ruler through the open sleeve of the Sling Comfort.

  6. Pull the loose end of the strap all the way through the Sling Comfort.

  7. Remove the ruler and adjust the Sling Comfort.

  8. Your sling is now ready to put your arm into and adjust the Sling Comfort once again for full comfort.   

  9. HINT:  After you have your sling on if you will adjust the Sling Comfort pulling slightly down over the Velcro of the sling it should keep your strap in place and secure.

 
Acceptance Mark

contat us at:  sling comfort
This page was last updated on 05/28/11.